Stribog Suppressor Compatible Handguard

Description

Stribog Suppressor Compatible Handguard Features:

• Suppressor and Blast shield compatible
• Perfect for rifle conversions
• Max recommended suppressor diameter without using M-Lok is 1.625″
• Max recommended suppressor diameter while using M-lok is 1.375″
• Adds between 2.25″ and 9″ of length to the existing Stribog receiver
• Machined from extruded 6061 Aluminum
• Adds additional M-Lok slots at the 3, 4:30, 6, 7:30 and 9 O’clock positions (Number of slots depends on length)(Please note that these slots will not bridge to those on the factory handguard)
• Extends the upper picatinny rail
• Does not require modification to the factory handguard
• Compatible with factory backup sights
• Compatible with all currently imported Stribog variants
• Compatible with OEM and aftermarket HB industries charging blocks
• Mounts using existing M-Lok slots
• Type III Hardcoat Anodized

IMPORTANT NOTE: Most versions require the use of an appropriately long barrel extension, extended barrel, blast shield or suppressor. See “Compatibility Specifics” below for details.

Total Weight Including Mounting Hardware:

• 2.25″ Weight: 3.8oz
• 3.25″ Weight: 5oz
• 6″ Weight: 7.5oz
• 9″ Weight:10.3oz

Compatibility Specifics:

Always verify that the fully enclosed muzzle device and/or barrel length extends beyond the end of the handguard before use. The below is a general reference guide only.

Stribog SP9A3S:

• 2.25″ requires the use of a blast shield, barrel extension or suppressor at least 2″ in length (with factory barrel), or a barrel at least 7″ in length
• 3.25″ requires the use of a blast shield, barrel extension or suppressor at least 3″ in length (with factory barrel), or a barrel at least 8″ in length
• 6″ requires the use of a barrel extension or suppressor at least 5.75″ in length (with factory barrel), or a barrel at least 10.75″ in length
• 9″ requires the use of a barrel extension or suppressor at least 8.75″ in length (with factory barrel), or a barrel at least 13.75″ in length

Stribog SP9A1 and SP9A3:

• 2.25″ A Blast shield is recommended. Muzzle reaches about 1/16″ beyond the end of the handguard.
• 3.25″ requires the use of a blast shield, barrel extension or suppressor at least 1.75″ in total length (with factory barrel), or a barrel at least 9.5″ in total length
• 6″ requires the use of a barrel extension or suppressor at least 4.5″ in length (with factory barrel), or a barrel at least 12.25″ in length
• 9″ requires the use of a barrel extension or suppressor at least 7.5″ in length (with factory barrel), or a barrel at least 15.25″ in length

UPDATE: 6″ and 9″ expected to be in stock Early July